Asus K8S-MX - Manual (Page 34)

1-24 Chapter 1: Product introduction
12. System panel connector (10-1 pin PANEL)
This connector accommodates several system front panel functions.
11. Digital Audio connector (6-1 pin SPDIF_OUT)
This connector is for the S/PDIF audio module to allow digital sound output.
Connect one end of the S/PDIF audio cable to this connector and the other
end to the S/PDIF module.
The S/PDIF out module is purchased separately.
• System Power LED Lead (Green 3-pin PLED)
This 3-pin connector connects to the system power LED. The LED lights up
when you turn on the system power, and blinks when the system is in sleep
mode.
• System Warning Speaker Lead (Orange 4-pin SPEAKER)
This 4-pin connector connects to the case-mounted speaker and allows you to
hear system beeps and warnings.
K8S-MX
®
K8S-MX Digital audio connector
+5V
SPDIFOUT
GND
SPDIF_OUT
K8S-MX
®
K8S-MX System panel connector * Requires an ATX power supply.
PLED-
PWR
+5V Speaker
PLED
Ground
RESET
Ground
Reset
Ground Ground PLED+
IDELED
+5V
IDE_LED
PWRSW
SPEAKER
PANEL