Airlink101 AR660W3G - Manual (Page 47)

48
3.3 Application & Gaming
3.3.1 Port Forwarding
The Port Forwarding allows you to re-direct a particular range of service port numbers (from the
Internet/WAN Ports) to a particular LAN IP address. It helps you to host some servers behind
the router NAT firewall.
Parameter Description
Enable Port Forwarding Enable Port Forwarding
Private
IP This is the private IP address of the server behind the NAT
firewall. Note: You need to give your LAN PC clients a
fixed/static IP address for Port Forwarding to work properly.
Computer Name
Pull down the menu and all the computers connected to the
router will be listed here. If you do not see any computer after
you click on the drop-down menu, select the option “Refresh”
and you will be given a list of computers that are connected to
your network. You can easily select the computer name without
checking the IP address of the computer.
Type
This is the protocol type to be forwarded. You can choose to
forward “TCP” or “UDP” packets only or select “both” to forward
both “TCP” and “UDP” packets.
Port Range
The range of ports to be forward to the private IP.
Comment
The description of this setting.
Current Port Forwarding Table
From the table, you can check each Port forwarding setting.