American Fibertek SMH10p-PoE - Manual (Page 48)

39
6.6.1 System configuration
 DHCP Server: Enable or Disable the DHCP Server function. Enable—the switch
will be the DHCP server on your local network.
 Low IP Address: Type in an IP address. Low IP address is the beginning of the
dynamic IP range. For example, dynamic IP is in the range between
192.168.1.100 ~ 192.168.1.200. In contrast, 192.168.1.100 is the Low IP address.
 High IP Address: Type in an IP address. High IP address is the end of the
dynamic IP range. For example, dynamic IP is in the range between
192.168.1.100 ~ 192.168.1.200. In contrast, 192.168.1.200 is the High IP
address.
 Subnet Mask: Type in the subnet mask of the IP configuration.
 Gateway: Type in the IP address of the gateway in your network.
 DNS: Type in the Domain Name Server IP Address in your network.
 Lease Time (sec): It is the time period that system will reset the dynamic IP
assignment to ensure the dynamic IP will not been occupied for a long time or the
server doesn’t know that the dynamic IP is idle.
 And
then, click Apply .
DHCP Server Configuration interface