Ashland I-900 Ver 1-2007 - Manual (Page 8)


KEY NO. PART NO. DESCRIPTION
1 A9055 Bowl and Frame
2 A8062 Pin, 1-1/4” x 7”
3 AFP-00002 Cotter pin, 3/16” x 1-3/4”
4 A1217 Pin, 1” x 3-1/2”
5 AFB-00054 Bolt, 1/2” NC x 3-1/2”
6 A8056 Pin, 1-3/4” x 7-3/4”
8 AFN-00011 Nut, 1/2” NC
9 A10168 Pin, 1-1/8” x 4-1/4”
10 A8031A Left cutting edge, 3/4” x 6” used on s/n 17196 & up
Requires (4) 5/8” x 2” Plowbolts
11 A8030 Center cutting edge, 5/8” x 8” x 54”
Requires (6) 5/8” x 2” Plowbolts
12 A8029A Right cutting edge, 3/4” x 6”, used on s/n 17196 & up
Requires (4) 5/8” x 2” Plowbolts
13 PB8P-NC-063-0200 Plow bolt, 5/8” x 2” (14 req’d for all blades)
7530 Nut: 5/8” NC
14. 14505 Fitting, Grease 1/8 UPT