Ashland I-155-TS2 - Manual (Page 45)


T
ORQUE
S
PECIFICATIONS
L
UBRICATION
1. Grease all zerks every 8 hrs of operation with high quality, general-purpose grease.
a) Grease until grease flows from around pin.
Lubrication Points
1. Hitch – Horizontal and vertical pins.
2. Lift Cylinders – Rod end; Both left & right sides.
3. Front Arm Pivot Joint – Both left & right sides.
4. Apron Pivot Pin; Both left & right sides.
5. Hold-down Rollers – Both left & right sides.
6. Tapered Rollers – Both left & right sides.
7. Lift Cylinders – Trunnion Mount Blocks; Both left & right sides
8. Lift Cylinders – Trunnion Mount Blocks; Both left & right sides