Ashland L-10 - Manual (Page 7)

KEY NO. PART NO. DESCRIPTION
1 A45H06 Hydraulic hose, 1/2" x 24" (4 req’d)
2 A906 Rear frame section
3 A908 Depth gague pointer
4 A911 Pin, 1-1/2" x 6" with grease hole
(uses 1/2 x 1" NC capscrew w/ lockwasher)
5 A904 Moldboard assembly, 9 ft.
A913 Moldboard assembly, 10 ft.
6 A907 Tilt Bracket
7 A905 Cutting edge, 9 ft.
A10S02 Cutting edge, 10 ft.
Plow Bolt, 1/2" NC x 1-3/4", (12 req’d 10ft or 11 req’d 9 ft.)
8 A910 Moldboard end plate (right and left same)
(uses 3/4" x 1-1/2" bolt at bottom rear
and 1/2" by 1-1/2" bolt at top)
9 A909 End plate brace for 9 ft. moldboard
(uses 5/8" x 2" bolt at frame and 5/8" x 1-1/2"
at end plate)
A914 End plate brace for 10 ft. moldboard
7