Ashland I-180TS - Manual (Page 17)

7
ITEM QTY PART NUMBER DESCRIPTION
  A Bowl and frame assembly
 0 AFB-00094 Flanged Bolt: /8” NC x ” long
  A69-L Left side dirt shield
4  A69-R Right side dirt shield
5  A508 Bushing: -/8” OD x ” ID x -/4 Lg.
7  A55 Corner cutting blade, “L” shape, reversible,
” x 6-/” L & R
Each blade requires: (6) 1” x 2-3/4” plow bolts, (2) 1” x 2-1/2” plow bolts, (8) 1” NC nuts
 A50 Left & Right Straight Corner Blade w/6  x -/4 plow
bolts & nuts each, 6 per side
8 1 A123356SER (stardard) Center blade, Serrated Both sides, Reversible
 A56SER Center blade, -side Serrated & -side Straight
 A56 Center cutting blade, reversible, Straight,
Blade Diamensions. 6” x 54-/4”
 A507* Center blade, 8” Straight, reversible
 A507-SER* Center blade, 8” dbl serrated, reversible
 A507-SERTC* Center blade, 8” dbl serrated w/ -pass
Tungsten/Carbide imbedding - reversible.
Blade Dimensions. 8” x 54-/4’’
Blade requires: (9) 1” x 2-3/4” plow bolts, (9) 1” NC nuts
0  PBP-NC-00-075 Plow bolt: ” NC x -/4” long
 5 AFN-000 Nut: ” NC
  A57 Bank shaver/router bit, reversible, L & R
Each blade requires: (5) 1” NC x 3” long bolts, (5) 1” NC nuts
 4 PBP-NC-00-50 Plow bolt: ” NC x -/” long
14 10 AFB-0018 Bolt: 1” NC x 3” long (5 per router blade)
5 4 AFB-00067 Bolt: -/4” NF x 7-/” long
6 4 AFN-000 Nut: -/4” NF
7  A-65 Axle mount
8  A5 Lift cylinder pin
9  A-09 Main frame pin
0  A58 Flanged bolt bushing
  AFB-00079 Bolt: 5/8” x  /” long
  A-98 Pins
  A-89 Pin Keeper
* Optional Center Blades
I-180 BOWL AND FRAME PARTS LIST