Ashland I-155TS2 - Manual (Page 16)

I-155 TS2
Nitrogen over Hydraulic Accumlator
This accumulator is rated at 4,000 psi and is pre-charged at the plant at 2,800 psi. any circuit pressure above
2,800 will bleed off into this accumulator until it reaches 2.11 gallons of hydraulic oil displacement. This
accumulator can be recharged with nitrogen however the accumulator is NOT REBUILDABLE.
Key Number Part Number Description
01 A155H67 Hose, 3/4” x 16” MORB with sweep
02 A125009 Bracket, Welded with bolts
03 A125005 Accumulator Cylinder
Ashland Industries Toll-free:877-634-4622 Fax:715-682-9717
Page #15