AOC A27W231 - Manual (Page 7)

6
USE OF THE REMOTE CONTROL
br
OPERATING INSTRUCTIONS
MENU Press repeatedly
to display OSD menu.
DPF
Not Support.
SWAP
Not Support.
WIDE
Includes 3 modes: Press
repeatedly to select 4:3 /
16:9 /16:9 non-Linear.
SLEEP
With this key you can set a
time period after which the
TV should switch itself to
standby. Press the key
repeatedly to select the
number of minutes. The
counter runs from 30, 60,
90,120 minutes. The timer
begins to count down from
the number of minutes
selected after the display has
disappeared.
POWER
Press to turn on/off the
TV. The TV is never
completely powered off
unless it is physically
unplugged.
0~9/100 Digit buttons
To select a TV channel.
TV/VIDEO
Select your input source:
press repeatedly to select
TV, AV1, AV2, S-VIDEO or
COMPONENT mode,
according to where you
connected your external
source.
y AV1/AV2 for a VCR
connected to the AV
connectors of the TV.
y S-VIDEO for a S-Video
VCR connected to the S-
VIDEO connector of the
TV.
y COMPONENT for a
DVD/DTV Set Top Box or
another component video
device connected to Y,
Pb, Pr and to the AV
AUDIO inputs L and R.
VOL
Press + or –(or or )
to adjust the volume.
MUTE
Temporarily interrupt the
sound or restore it.
CH
Press
or (or ▲ or ▼)to
browse through the TV
channels which are not
erased.
PRE-CH
To display the previously
selected TV channel.
SOUND
To select Mono
/Stereo/Sound A /Sound
B / Sound AB from TV
RF input.
PC
select your input source
to PC.
DISPLAY
(1) Display Channel number
when use RF input.
(2) Display input source
when use other input
except TV RF input.
PIP
Select PIP on/off
WIRELESS
Not Support.