Brodix Small Block Chevy Compatible Block - Manual (Page 2)

BL
OCK P
ART NUMBERS
MAIN CAP P
ART NUMBERS
SLEEVES
•
8B HS 3650: 3.650 X .4375
•
8B HS 4750: 4.750 X .4375
•
8B HS 5000: 5.000 X .4375
•
8B HS 5550: 5.550 X .4375
•
8B HS 6000: 6.000 X .4375
•
8B HS 6250 3/8: 6.250 X .4375 STEPPED
TO .375 FOR -12 AND -18
•
8B HS 6300: 6.300 X .4375
•
8B HS 6600 3/8 H-11: 6.600 X .4375 STEPPED
TO .375 FOR GB 2300
•
AR 300-8303: 12 POINT 7/16 NUT
•
AR AJN 12-1: 3/8 12 POINT NUT
•
AR AJW 750: 3/8 W
ASHER
•
8B MS HS W
ASHER: 7/16 HS W
ASHER
• 8B
PLUG/BLOCK
• 8B
PLUG/-10
•
8B PLUG 814-6C: #6 AN ALUMINUM PLUG
•
8B PLUG 814-7C: #7 AN ALUMINUM PLUG
•
8B PPLUG ST 1/4: STEEL PIPE PLUG
•
8B PPLUG AL 1/4: ALUMINUM PIPE PLUG
•
8B PPLUG ST 3/8: STEEL PIPE PLUG
•
8B PPLUG AL 3/8: ALUMINUM PIPE PLUG
•
8B PPLUG ST 1/2: STEEL PIPE PLUG
•
8B PPLUG AL 1/2: ALUMINUM PIPE PLUG
•
8B 0-RING/-10 PLUG: O-RING FOR -10 PLUG
•
8B O-RING/BLOCK PLUG
MAIN STUDS, NUTS, MAIN CAP BOL
TS, AND W
ASHERS
CAM L
OCA
TION AND SPECS
•
ST
ANDARD CAM LOCA
TION
•
RAISED CAM LOCA
TION -.391
•
USE WIDE BEARING WITH 1/4” LOCKS IN CENTER
BEARINGS AND SPIRAL LOCKS ON THE TWO END BEARINGS
•
A
VAILABLE
WITH
BIG
BLOCK
CAM
JOURNALS
•
REQUIRES SPECIAL CAM BEARINGS A
VAILABLE
FROM BRODIX
•
ROLLER CAM BEARINGS A
VAILABLE UPON
REQUEST
•
50 mm CAM BEARINGS A
VAILABLE UPON REQUEST
•
55 mm CAM BEARINGS A
VAILABLE UPON REQUEST
•
8B 1200 SERIES .391 RAISED CAM ONL
Y
ACCESSORIES
•
A
VAILABLE WITH OR WITHOUT A FUEL PUMP
•
ST
ANDARD BLOCK - ST
AR
TER BOSS ON RIGHT SIDE
•
NO ST
AR
TER PROVISION ON SPRINT CAR BLOCKS
•
HEAD STUDS A
VAILABLE
•
PLUG KIT INCLUDED FOR BLOCKS
MAIN CAPS
•
350 OR 400 MAINS
•
BILLET STEEL MAIN CAPS ST
ANDARD
•
ALIGN HONE A
VAILABLE
•
ALL CAPS ARE WET SUMP - MUST BE PLUGGED FOR
DR
Y SUMP USE
HEIGHTS OF BL
OCK
S
•
9.010 TO 9.510
•
9.010 TO 9.625, 8B 1200 SERIES
STROKE CLEARANCE
• ST
ANDARD CAM LOCA
TION - 4.125
• RAISED CAM - 4.250 • RAISED CAM LOCA
TION HAS A WIDE P
AN RAIL ONL
Y
•
8B 1200 SERIES, UP TO 4.375 ST
ANDARD,
4.500 WITH ADDITIONAL MACHINING
•
8B 1000*: 400 MAIN BLOCK, 4.125 BORE
•
8B 1050*: 350 MAIN BLOCK, 4.125 BORE
•
8B 1100*: 400 MAIN BLOCK, 4.000 BORE
•
8B 1150*: 350 MAIN BLOCK, 4.000 BORE * PLEASE SPECIFY BELL HOUSING STYLE AND CAM LOCA
TION THA
T IS DESIRED
•
8B 1200 C: 400 MAIN BLOCK, 4.125 BORE STD
BELL HOUSING
•
8B 1200 D: 400 MAIN BLOCK, 4.125 BORE OPEN
BELL HOUSING
•
8B 1250 C: 350 MAIN BLOCK, 4.125 BORE STD
BELL HOUSING
•
8B 1250 D: 350 MAIN BLOCK, 4.125 BORE OPEN
BELL HOUSING
•
350 ST
-L: 350 ALL STEEL, LIGHTENED
•
400 ST
-L: 400 ALL STEEL, LIGHTENED
•
350 AL/ST
-L: 350 ALUMINUM FRONT AND
REAR, STEEL CENTERS, LIGHTENED
•
400 AL/ST
-L: 400 ALUMINUM FRONT AND
REAR, STEEL CENTERS, LIGHTENED
•
350 TI: 350 TIT
ANIUM FRONT AND CENTERS,
ALUMINUM OR STEEL REAR
•
400 TI: 400 TIT
ANIUM FRONT AND CENTERS,
ALUMINUM OR STEEL REAR
•
8B MS 4500: 7/16 X 4.500 LONG
•
8B MS 4100: 7/16 X 4.100 LONG
•
8B MS/HS: W
ASHER FOR MAIN STUD
•
8B MS 12 PT NUT
: 7/16 NUT
•
8B BOL
T/12 PT 3/8: 12 POINT 3/8 BOL
T
•
8B W
ASHER 3/8 H: 3/8 AN HARDENED W
ASHER
•
8B SL 100-1010: 350 THICK W
ALL REP
AIR
SLEEVE ONL
Y
•
8B SL 100-1011: THICK W
ALL REP
AIR SLEEVE ONL
Y
•
8B SL 100-1011 TD: 400 THICK W
ALL REP
AIR
SLEEVE ONL
Y FOR T
ALL DECK
•
8B SL 43-075: ST
ANDARD 400 W
ALL SLEEVE
•
8B SL 43-075 A: ST
ANDARD 350 W
ALL SLEEVE
•
8B SL 43-075 TD: ST
ANDARD 400 W
ALL SLEEVE
FOR T
ALL DECK
•
8B SL 43-075 TD 5: ST
ANDARD 400 W
ALL
SLEEVE
FOR 9.500 T
ALL DECK
•
8B SL 41-535 4.170 ID, 4.365 OD STD DECK SLEEVE
FOR 8B 1200 SERIES BLOCKS
•
8B SL 41-600 4.170 ID, 4.365 OD T
ALL DECK SLEEVE
FOR 8B 1200 SERIES BLOCKS
HEAD STUDS PLUGS AND O-RINGS •
8B DOW/PULL: DOWEL FOR MAIN CAPS
•
8B DOW/RING: RING DOWEL FOR MAIN CAPS
•
8B DOW/TC HEAD: TIMING COVER HEAD DOWEL
•
8B DOW/TC FRONT
: TIMING COVER DOWEL
•
8B DOW/BH 1.25: BELL HOUSING DOWEL 1.25 LONG
•
8B DOW/BH 1.50: BELL HOUSING DOWEL 1.50 LONG
DOWEL
S
•
8B BOL
T/CAM-LOCK: LOCK FOR CAM BEARING
•
8B RCAM PLUG BB: BIG BLOCK CAM PLUG
•
8B RCAM PLUG BB SPRINT
: BIG BLOCK CAM PLUG
FOR SPRINT
•
8B RCAM PLUG 55: 55 mm CAM PLUG
•
8B RCAM PLUG SPRINT
: CAM PLUG FOR SPRINT
•
8B RCAM PLUG STD: CAM PLUG FOR STD BLOCK
•
8B O-RING/RCAM PLUG: O-RING FOR REAR CAM
PLUG
•
8B ORING/RCAM PLUG BB: O-RING FOR BB CAM
PLUG
•
8B ORING/RCAM PLUG 55: O-RING FOR 55 mm CAM
PLUG
•
8B RCAM-SNAP RING: REAR CAM SNAP RING
•
8B RCAM BB RING: REAR CAM SNAP RING FOR BB
CAM
•
8B SPIRAL LOCK: SPIRAL RET
AINING RING
•
8B SPIRAL LOCK BB: SPIRAL RET
AINING RING FOR
BB CAM
•
8B SPIRAL LOCK 55: SPIRAL RET
AINING RING FOR
55 mm
•
8B SPIRAL LOCK RB: SPIRAL RET
AINING RING FOR
ROLLER BEARING
•
8B RCAM SEAL: REAR CAM SEAL FOR SPRINT
CAM PLUGS
www.brodix
.com • 301 MAPLE A
VENUE • P
.O. BOX 134
7 • MENA
, AR 7
1953
ORDER, TECH, AND INFORMA
TION: (4
79) 394-1075 • F
AX: (4
79) 394-1996
BRODIX
®
has been the innovative
leader in cylinder head quality and technology for the past 40 years. The BRODIX
®
block is no exception and
is made fr
om the highest quality vir
gin
A-356 aluminum. The main webs have been r
einfor
ced to withstand all types of
racing. This block is of
fer
ed in several
versions.
•
4.000 OR 4.125 BORE WITH MAX BORE 4.155
•
ST
ANDARD: 4.2725 o.d. X 5.540 o.a.l.
•
9.300 T
ALL DECK: 4.2725 X 5.740 o.a.l.
•
9.500 T
ALL DECK: 4.2725 o.d. X 6.040 o.a.l.
•
REP
AIR SLEEVES A
VAILABLE
•
8B 1200 SERIES, 4.180 MIN BORE, 4.250 MAX BORE
•
9.000 T
ALL DECK: 4.365 o.d. X 5.535 o.a.l.
•
9.600 T
ALL DECK: 4.365 o.d. X 6.000 o.a.l.
SLEEVES TORQUE SPECS
•
OUTSIDE MAIN: 65 ft-lb TORQUE WITH LIGHT OIL
•
INSIDE MAIN: 75 ft-lb
•
FRONT AND REAR MAIN: 3/8 12 POINT 30 ft-lb
•
HEAD TORQUE: 70 ft-lb
OILING SYSTEM
•
PRIMAR
Y OILING SYSTEM
•
WHEN USING RAISED CAM BLOCK, OIL PUMP
SHAFT MUST BE MODIFIED OR SP
ACER MUST
BE INST
ALLED UNDER WET SUMP OIL PUMP
.
(.350 THICK)
• REMOTE OIL FIL
TER ONL
Y
Not legal for sale or use on pollution contr
olled motor vehicles.
© Copyright 2010 Br
odix, Inc.
Replacement Par
t Numbers
Not legal for sale or use on pollution contr
olled motor vehicles.
© Copyright 2010 Br
odix, Inc.
www.brodix
.com • 301 MAPLE A
VENUE • P
.O. BOX 134
7 • MENA
, AR 7
1953
ORDER, TECH, AND INFORMA
TION: (4
79) 394-1075 • F
AX: (4
79) 394-1996
PRIMARY OIL SYSTEM
BRODIX
®
SMALL BLOCK
350 / 400 WET SUMP
OIL P
ASSAGE MAP