Clinton Electronics CE-VF540 - Manual (Page 25)

Sales: 1-800-447-3306 Support: 1-800-549-6393 www.clintonelectronics.com
 CAM TITLE : If you enter a title, the title will appear on the monitor.
1) If the SPECIAL menu screen is displayed, use the Up and Down
buttons so that the arrow
indicates ‘CAM TITLE’.
2) Set it to ‘ON’ by using the Left
and Right buttons.
3) Press the SET button.
4) Use the 4 direction buttons to
move to a desired letter and
select the letter by pressing the
SET button. Repeat this to enter
multiple letters. You can enter
up to 15 letters.
5) Enter a title, move the cursor to ‘POS’ and
press the SET button. The entered title
appears on the screen. Select the position
to display the title on the screen by using
the 4 direction buttons and press the SET
button. When the position is determined,
select ‘END’ and press the SET button to
return to the SPECIAL menu.
Notes
• When the CAM TITLE menu is ‘OFF’, no title will be displayed on the monitor
screen even if you enter one.
• Only English is available is this mode.
• If you move the cursor to CLR and press the SET button, all the letters are
deleted. To edit a letter, change the cursor to the bottom left arrow and
press the SET button. Move the cursor over the letter to be edited, move
the cursor to the letter to be inserted and then press the SET button.
22