Clinton Electronics CE-RP1 - Manual (Page 20)

Sales: 1-800-447-3306 Support: 1-800-549-6393 www.clintonelectronics.com
In order to navigate use [ ] buttons and confirm by pressing [ ]
button. Press [ ] playback button in order to change the editing mode.
• CELL EDIT : Here you can (de-) activate every single cell.
• DEL BLOCK : Here you can deactivate a complete block of cells.
• DEL ALL
: Here you can deactivate all cells at once.
• ADD BLOCK : Here you can activate a complete block of cells.
• ADD ALL
: Here you can activate all cells at once.
Set MD Sensitivity
Here you can set the sensitivity of motion detection.
• MD ENERGY : Shows the current recognized motion.
• MD THRESHOLD : By pressing the buttons [ ] or [ ] you can set the
value when motion detection is triggered. The lower the
value is set the more sensitive motion detection reacts.
l
Manual Record
l Motion Setup continued
17