Cyron Lighting AGS103 Safety Skirt - Manual (Page 2)

Alternatively, you can find these wires by using a
voltmeter or test probe. With the ignition on: The
brake wire has no voltage unless the brakes are
applied. The running light wire has constant
voltage regardless of brakes or turn signal.
If still not sure, you can follow the wires to the
inside of light housing. This may help you
decipher which wire is the brake light wire.
4. Wiring:
See Figure Two.
You can cut the wires to size if you can plan for
the placement of the lights, 2-level-circuit module
and other components ahead of time.
Using the Scotchlok
® connector, connect
ORANGE wire to the running light.
a
Do not cut the factory wires as this may void
vehicle factory warranty. Connect BLUE to the
brake wire. The PURPLE wire to positive of your
LED lights using the butt splice connector provided. Connect the negative (-) of the LEDs (normally tin-conductor or
black jacket) to the negative of the bike. You may choose to extend the negative wire and/or use the ring terminal
(provided) to facilitate this connection. The connection can be at the battery post or any location on the bike with solid
metal connection, ie a mounting screw/bolt on bare metal.
Pay special attention to placement of the wires. Avoid moving parts or coming in direct contact with the engine,
pipes or any hot objects. Use wire ties to secure the wires.
5. Test:
Check all connections before turning on the ignition. Make sure all connections are correct and secure. Turn on
the ignition. CYRON Safety Skirt lights should turn on. Apply brakes. The lights should get brighter when brakes are
applied. If this does not happen please contact CYRON tech support before operating your vehicle.
Enjoy your new CYRON LED Lighting and Ride Safe!
WARRANTY
Cyron warrants this product against any defects in materials or workmanship for a period of ONE (1) year from the date of purchase. The warranty covers normal usage as intended by the factory and does
not cover misuse, abuse, accidents, or damages caused due to the acts of God. Proof of purchase is required.
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS
LIMITED WARRANTY, OTHERWISE THE REPAIR, REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN
LIEU OF ALL OTHER WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL CYRON, INC. BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE
PURCHASE PRICE OF THE PRODUCT, ACCESSORY OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, OR
OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY
LAW.
Some states and jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may
not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state or from one jurisdiction to another.
Please mail all warranty claims to:
CYRON, Inc.
AGS Warranty Claim
9439 Irondale Ave.
Chatsworth, CA 91311 USA
Further warranty inquiries: [email protected]
Laws concerning additional lights on a vehicle vary in different regions. Consult your local authorities regarding the regulations.
Other quality automotive lighting accessories & upgrades available from CYRON
For details please contact your local dealer or inquire at www.CYRON.com:
Part Number
Description/Application .
MLKP7C-[color] Accent Lighting Kit, , Platinum, Remote Control with 7xCV6 chrome lights
MLKG4C-[color] Accent Lighting Kit, Gold, Remote Control with 4xCV6 chrome lights
CV62C-[color] Convex 6LED Cluster, Chrome finish PAIR
CV62-[color] Convex 6LED Cluster, Black finish PAIR
FL30-[color] PRO SERIES – FlexLED super flexible strips, 30LED, 12”
FL24-[color] PRO SERIES – FlexLED super flexible strips, 24LED, 10”
FL18-[color] PRO SERIES – FlexLED super flexible strips, 18LED, 7”
CMF1202 Rigid mount for FlexLED, 10”, perfect for ground effect and light under saddle bags
CON-TB005 Solder-less Terminal Block, 5 outlet
AB1156D-24 Light bulb, 24LED 1156 single contact, Amber OR Red
AB1157D-24A Light bulb, 24LED 1157 dual contact, Amber OR Red
AB3156D-24A Light bulb, 24LED 3156 single contact, Amber OR Red
AB3157D-24A Light bulb, 24LED 3157 dual contact, Amber OR Red
RC2-12 Wireless Remote Control, On-Off, 2 remotes, 12VDC, 20A rating
MK08-6 Multicolor Lighting Kit, 6x8” lightbars, Multi function remote control
MK12-6 Multicolor Lighting Kit, 6x12” lightbars, Multi function remote control
BL102 Automatic Bag Lights, PAIR
___ Figure Two ___