Cyron Lighting HTW1000 User Manual
Page 2
CYRON Media Highlighter Lightbar
Wire Color Code
CYRON Lightbar Wires
(Not the same as HTHUB wires)
HTW1000 Terminal Block
Green
+12V
Black
B
Red
G
White
R
TABLE ONE
STEP FIVE: Place the PCB back in their positions and close the back cover. Pay close attention to the
wires connecting the side PCBs to the main PCB.
STEP SIX: Manage the wires. Use zip ties or other means to secure the wires
together. As stated in the User Manual, the IR receiver will need to be connected
to the IR plug. The IR receiver needs to be in the line of sight in order for the
remote to work.
Keep the controller and wires away from extreme heat,
liquids, and moving objects.
Low voltage wires can be routed through walls and
cabinets as long as proper care is taken to avoid damages.
DO NOT modify internal components. Tampering with
components and wiring will void factory warranty.
For operations please see the User Manual. If you have any questions please contact CYRON Technical
Support at [email protected] or 888-297-6660 x106.
Additional Notes:
It is also possible to hardwire the 6-outlet Media Highlighter Hub (Part# HTHUB6) to the HTW1000
terminal block. Table Two shows the wiring diagram.
Hardwiring the Media Highlighter
Hub HTHUB6
HTHUB6 Hub Wire
HTW1000 Terminal Block
Black
+12V
Green
B
White
G
Red
R
TABLE TWO