Cyron Lighting MLK Kits 2011 User Manual
Page 2
6.
Wiring:
See wiring diagram. Connect the positive (+) of the lights (normally indicate by one of: red jacket,
white jacket, copper-conductor or black wire with white stripe) to a terminal block. This will be the common
junction for all the positive wires of the lights.
You may want to put a red mark on this terminal block to indicate common positive junction.
Wires can be twisted together and placed in any of the open slots. Connect the remote module +12Vout (Yellow
wire) to one of the slots.
Pay special attention to placement of the wires. Avoid moving parts or coming in direct contact with the
engine. Use wire ties to secure the wires.
Connect the negative (-) of the LEDs (normally tin-conductor, or black jacket) to terminal block. These wires
can be twisted together and placed in any of the four open holes. Connect one of the negative (-) remote module
leads (Black wire) to the terminal block.
Crimp ring terminals on positive lead (with Fuse Holder) and the negative (Black wire) of the Remote Module.
Connect the rings to the battery (+) and (-) terminals. See Wiring Diagram for details.
7. Remote Module:
DO NOT make any connection to gray wire. Find a location for the remote module so it
is away from the elements. The location will vary depending on make/type of the bike. Under the seat, in the tool
box, inside permanent saddlebags are some of the choices. Make sure the seat or other parts around the module
mounting location do not damage the unit. Use the two-sided tape provided to secure the remote module in
place. The remote module is not water tight. Extra care should be taken to avoid contact with water.
8. Final Check:
Double check all the connections. Use wires ties to secure all the wires out of sight and away
from any heat source and moving parts. Use the remote to turn the lights on/off.
Enjoy your new CYRON LED Lighting Kit and
Ride Safe!
WARRANTY
Cyron warrants this product against any defects in materials or workmanship for a period of ONE (1) year from the date of purchase. The warranty covers normal usage as intended by the
factory and does not cover misuse, abuse, accidents, or damages caused due to the acts of God. Proof of purchase is required.
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR, REPLACEMENT, OR REFUND AS PROVIDED UNDER
THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OF
IMPLIED. IN NO EVENT SHALL CYRON, INC. BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE
PURCHASE PRICE OF THE PRODUCT, ACCESSORY OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF
REVENUE OR PROFITS, LOSS OF BUSINESS, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE
PRODUCTS OR ACCESSORIES TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.
Some states and jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or
exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state or from one jurisdiction to another.
Please mail all warranty claims to:
CYRON, Inc.
MLK Warranty Claim
9439 Irondale Ave.
Chatsworth, CA 91311 USA
Further warranty inquiries:
Laws concerning additional lights on a vehicle vary in different regions.
Consult your local authorities regarding the regulations.
Other quality automotive lighting accessories & upgrades available from CYRON
For details please contact your local dealer or inquire at www.CYRON.com:
Part Number
Description/Application .
CV62C-[color]
Convex 6LED Cluster, Chrome finish PAIR
CV62-[color]
Convex 6LED Cluster, Black finish PAIR
CV610C-[color]
Convex 6LED Cluster, Chrome finish BULK PACK 10pcs
CV610-[color]
Convex 6LED Cluster, Black finish BULK PACK 10pcs
MLMP7C
Multicolor Platinum Motorcycle Kit, Multiple colors & patterns, 7 x CV18, Remote, Extension cords
MLMG7C
Multicolor Gold Motorcycle Kit, Multiple colors & patterns, 4 x CV18, Remote
FL30-[color]
FlexLED super flexible strips, 30LED, 12”, Can be trimmed smaller
CMF1202
Rigid mount for FlexLED, 10”, perfect for ground effect and lights under saddle bags
CON-TB005
Solder-less Terminal Block, 5 outlet
AB1156D-24
Light bulb, 24LED 1156 single contact, Amber OR Red
AB1157D-24
Light bulb, 24LED 1157 dual contact, Amber OR Red
AB3156D-24
Light bulb, 24LED 3156 single contact, Amber OR Red
AB3157D-24
Light bulb, 24LED 3157 dual contact, Amber OR Red
RC2-12
Wireless Remote Control, On-Off, 2 remotes, 12VDC 10A rating
RC50-12
Multi-zone / Multicolor remote, 14 functions, 12VDC 9A rating