Cyron Lighting HRP307 - Manual (Page 2)

Thank you for purchasing CYRON HRP307
RGB Data Repeater.
Contents
1x HRP307
Installations
A
Make sure the overall system is
planned properly without exceeding any of
the product voltage/current ratings.
The input can accept any PWM signal from
CYRON RGB controllers. For ease of
connectivity terminal blocks are provided
for all connections. Additionally, Plug&play
to Media Highlighter controller ports can be
achieved by accessory part no. HTPLG1.
Connect all RGB input and output
connections before powering up the
HRP307. Secure the unit in place using
screws. For proper ventilation minimum
one cubic foot space required when
operating at more than 50% maximum
power.
w
It is important to use proper wire gauge
for high current connections. Pay close