Eddie Motorsports MS107-60 - Manual (Page 4)

4
Install Rear Compressor Bracket:
1. Attach rear compressor bracket to water pump using two M10 cap screws x 20mm with anti
seize.
Install Compressor Bracket:
1. Install compressor bracket to passenger side spacer posts with three M8 x 25mm cap screws and
washers with anti seize. Finger tighten.
Note: Make sure waterneck and thermostat are installed on water pump first.
Install A/C Compressor:
1. Install A/C compressor using two M8 x 25mm cap screws and anti sieze. Finger tighten.