Equus 3140 - Scan Tool CanOBD2&1 Kit - Manual (Page 16)

14 CanOBD2&1
E
CanOBD2&1 Scan Tool Controls
VIEWING DTCs IN THE CANOBD2&1 SCAN TOOL’S MEMORY
VIEWING DTCs IN THE CANOBD2&1 SCAN TOOL’S
MEMORY
To view DTC’s and other diagnostic data stored in the CanOBD2&1
Scan Tool’s memory, do the following:
1. With no DLC cable connected to the CanOBD2&1 Scan Tool, press
the POWER/LINK button to turn the CanOBD2&1 Scan Tool
“on”.
■ The “To Retrieve DTCs” screen shows
on the CanOBD2&1 Scan Tool’s dis-
play. Press the button for instruc-
tions to view DTC’s in memory.
2. Press the ENTER/LD button.
■ The “Select OBD System” screen dis-
plays.
3. Use the and keys to highlight
and select your vehicle’s OBD system
(OBD1 or OBD2). Press the ENTER/LD
button to continue.
■ Select “Back” if you wish to return to
the Main Menu.
4. If DTCs are present in the CanOBD2&1
Scan Tool’s memory, the first stored
DTC will display on the screen.
■ If more than one DTC is present, use
the DTC SCROLL
button to
scroll through the DTC’s.
5. For OBD2 systems only - Freeze
Frame Data (if available) will display
after DTC #1.
6. If no DTCs are in the CanOBD2&1 Scan
Tool’s memory, a “No DTC’s are
presently stored in the Code Readers
memory” message displays.