Fantasea Line FP7000 BigEye Lens - Manual (Page 5)

5
BigEye Lens FP7000 Instruction Manual 20110523
encounter any resistance, the right side of the color insert is probably not installed all the way in.
Reinstall the right side of the color insert and proceed with the left side of it.
j. Mount the BigEye Lens with color insert installed inside on the housing lens port. Make sure the
secure string of the color insert is positioned between the corresponding teeth of the BigEye Lens
adaptor, so it doesn’t interfere with proper installation of the lens (image #7).
k. The color insert can be installed and removed during the course of the dive. Make sure that there
are no air bubbles trapped inside the lens before taking images.
l. Note that white balance, flash and exposure settings might require adjustments once the color insert
is installed. Please refer to the color correction filter instruction manual for further information.
m. To remove the color insert from the BigEye Lens, first take the BigEye Lens off the housing lens port.
Proceed by gently pulling the secure string of the color insert till the insert pops out of the BigEye
Lens. Make sure that the color insert is secured with a secure line to the housing or arm so you do
not lose it once removed. White balance, flash and exposure settings might require adjustments
once the color insert is removed.
5. Care & Maintenance
1. Please use the utmost care and do not use excessive force when assembling and disassembling the
different accessories, in order to not cause any damage to the product.
2. Keep the BigEye Lens away from extreme high temperatures, as under direct sunlight, since it might
damage the O-ring and interfere with the watertight seal of the lens.
3. Do not clean the lens with any chemical solvents or other materials, which might cause damage to the
plastic dome.
4. Never look at the sun through the lens.
5. When storing the lens and during transportation, make sure that it is properly protected by using the
Neoprene lens cover and a padded bag in order to prevent scratches, cracks or any other damage to the
lens.
Image #6 Image #7