Fantasea Line G Series RedEye Filter - Manual (Page 2)

2
Canon G Series Adaptors & Filters Instruction Manual 2011016
4. Compatibility
The EyeDaptor G Series-F67, RedEye Filter G Series and PinkEye Filter G Series are compatible with the
Canon G10 Housing (WP-DC28) and the Canon G11/G12 Housing (WP-DC34).
5. Instructions for Use
1. Assembling the EyeDaptor G Series-F67
a. Place the EyeDaptor G Series on a flat and protected surface, so that the adaptor configuration is
facing up and the flat side of the adaptor is facing down (image #1).
b. Remove the 4 screws holding the 2 stoppers by using the screwdriver included (image #2).
c. Turn the EyeDaptor G Series upside down and remove the 2 stoppers off the adaptor (image #3).
d. Place the 67mm Add-On Plate on a flat and protected surface, so that the thread is facing down and
the concaved side of the plate is facing up (image #4).
e. Place the EyeDaptor G Series over the 67mm Add-On Plate so that the adaptor configuration is
facing up and the flat side of the adaptor is facing the 67mm Add-On Plate (image #5).
Important Notice
Please use the utmost care and do not use excessive force when assembling and
disassembling the different accessories, in order to not cause any damage to the
product.
Image #4 Image #5
Image #1 Image #2 Image #3