Fantasea Line Nano Fiber Optic Cable Kit - Manual

1
Fantasea Nano Fiber Optic Cable Kit Instruction Manual 20110120
Fantasea Nano Fiber Optic Cable Kit
(Cat. No. 6315)
Instruction Manual
Introduction
Most underwater slave strobes are capable of
synchronizing with the camera internal flash
without any cables under certain diving
conditions. They feature a slave sensor that
triggers the strobe to fire in sync with the camera
internal flash, as long as the strobe and the
camera are positioned on the same axis and as
long as there is not much ambient light available.
However, if the strobe slave sensor isn’t pointed
directly at the camera internal flash, or when photographing during daylight, in clear water
and bright conditions, the slave sensor might fail recognizing the output of the camera
internal flash.
Connecting the Nano Fiber Optic Cable between the camera internal flash and the slave
strobe ensures full synchronization in all angles and diving conditions.
Identification of Nano Fiber Optic Cable Kit Parts
Nano Fiber Optic Cable
Velcro Strips
Nano Adaptor
Screwdriver
1
1
2
2
3
3
4
4