Hootoo HT-UD01 - Manual (Page 38)

© DisplayLink 2014 – Issue 1 Page 38
DisplayLink USB Graphics User Manual
Software Version 7.6
8.1.2. Configuring the audio output
To configure the audio output to match your speaker setup
1. Open the Audio setup from the DisplayLink UI
2. Select the USB Audio device
3. Click on Configure. The audio configuration window is shown
4. Choose your audio configuration to match your speaker setup. Click Next
5. Customize your configuration as required and Click Next
6. Click Finish
8.2. Configuring USB audio on Windows XP
8.2.1. Setting USB audio as the default output
The audio settings can be opened from the DisplayLink UI, by choosing the Audio Setup option. The Sound and Audio
Devices Properties window is shown