HUACAM HCV802 - Manual (Page 30)

www.huacam.com 30
• Enable FTP: When checked, built-in FTP client is enabled.
• FTP Server: IP or Domain name of FTP site or server
• FTP Server Port: TCP port for FTP server, default port number 21
• User Name: FTP server User ID
• Password: FTP server user password
• Path: Path in the server where upload files are stored.
NOTE:
— Click “Save” to save the FTP configuration information.
— Click “Test” after configuration, if setting is correct, a test FTP operation will be performed
and “Test successful!” yellow bar will display if the operation is successful.
5.5 Alarm Server Settings Page (Upload Alarm to supported VMS
or HTTP Server)
This page allows user to configure alarm HTTP server to upload alarms:
Figure 14: Alarm HTTP Server Setting Page