Ricoh Aficio MP W2400 - Manual (Page 32)

Troubleshooting When Using the Copy Function
26
2
When Memory Is Full
This section explains likely causes of and possible solutions for problems related
to full memory.
Message Cause Solution
Memory is full.
nn originals have
been scanned.
Press [Print] to
copy scanned
originals. Do not
remove remaining
originals.
“n” in the message repre-
sents a changeable
number.
The scanned originals
exceeds the number of
pages that can be stored
in memory. Press [Print] to copy scanned originals
and cancel the scanning data. Press
[Stop]
to cancel the scanning data and
not copy.
Press [Continue] to
scan and copy re-
maining originals.
The machine checked if
the remaining originals
should be copied, after
the scanned originals
was printed. To continue copying, remove all copies,
and then press [Continue]. To stop copy-
ing, press [Stop].