Ricoh Aficio MP W2400 - Manual (Page 36)

Troubleshooting When Using the Printer Function
30
3
When a Message Appears
This section describes the principal messages that appear on the panel display.
If a message not described here appears, act according to the message.
Note
❒ Before turning the main power off, see “Turning On the Power”, About This
Machine.
Reference
“Turning On the Power”, About This Machine
Status Messages
This section describes the machine status messages.
Message Status
Ready This is the default ready message. The machine is ready
for use. No action is required.
Waiting... The machine is waiting for the next data to print. Wait a
while.
Offline The machine is offline. To start printing, switch the ma-
chine online by pressing [Online].
Please wait. This message might appear for a second or two while the
machine is preparing, performing initial adjustments, or
adding toner. Wait a while.
Job Suspended... All jobs in the machine are suspended. Wait a while.
Hex Dump Mode In the Hex Dump mode, the machine receives data in
hexadecimal format. Turn off the machine after printing,
and then turn back on.
Resetting job... The machine is resetting the print job. Wait until
“
Ready ” appears on the display panel.
Setting change... The machine is setting changing. You cannot use the con-
trol panel while this message is displayed. Wait a while.