Ricoh Aficio MP W2400 - Manual (Page 85)

Maintaining Your Machine
79
7
Maintaining Your Machine
If the exposure glass, or platen plate is dirty, copy clarity may be reduced. Clean
these parts if they are dirty.
Important
❒ Do not use chemical cleaners or organic solvents, such as thinner or benzene.
If such substances get inside the machine or melt plastic parts, a failure might
occur.
❒ Do not clean parts other than those explicitly specified in this manual. Other
parts should only be cleaned by your service representative.
❖ How to maintain
Cleaning the machine: Wipe the machine with a soft, dry cloth. If this does not
remove the dirt, wipe the machine with a damp and tightly wrung cloth. If a
damp cloth still does not remove the dirt, try using a mild detergent. Wipe the
machine with a dry cloth to remove the moisture, after using a damp cloth.
Cleaning Inside the Original Cover
If you open the original cover, you can access the exposure glass and original
feed mechanism.
A
Open the original cover while holding it on both sides.
B
Wipe the exposure glass with soft, dry cloth.
ATJ038S
ATJ039S