King of Fans 82820 HV-20G 20 HIGH VELOCITY User Manual

Page 3

Advertising
background image

ASSEMBLY INSTRUCTIONS

1.

Please put the fan body on a flat and stable surface

as shown in the picture.



2. Remove the two screws from the steel tube

attached to the fan head, save them for step 4.


3. Align the hole in the stand with the hole in the

steel tube attached to the fan head.





4. Loosen the adjustment knobs at the side of

the fan body just slightly to make the
attached steel tube pivot, carefully Insert

the ends of the stand into the counterparts
and align the holes.


5. Carefully insert the screws from step 2 into

the holes and tighten. Please be sure to
re-tighten the adjustment knobs loosened in
step 3 to avoid swaying of the fan head.



Advertising