Preparation, Continued), Antenna connection – Audiovox FPE1506 User Manual

Page 8

Advertising
background image

Preparation

(continued)

CABLE TV (CATV) CONNECTION
A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75- ohm
coaxial cable to the set, screw the 75-ohm cable to the ANT. Terminal.
Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay
channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by
the cable TV company.
This converter/descrambler is necessary for normal viewing of the scrambled channels. For more
specific instructions on installing cable TV, consult your cable TV company. One possible method of
utilizing the converter/descrambler provided by your cable TV company is explained below. Please

“A” position on the RF switch (not supplied) : You can view all unscrambled channels by using the TV’s
channel keys.
“B” position on the RF switch (not supplied) : You can view the scrambled channels via the
converter/descrambler by using the converter’s channel keys.

Antenna Connection

Note:
Consult your Dealer or Service Center for the type of splitter, RF switch or combiner that might
be required.
ANTENNAS
The antenna requirements for good color television reception are more important than those for black
& white television reception. For this reason, a good quality outdoor antenna is strongly recommended.
The following is a brief explanation of the type of connections that are provided with the various
antenna systems.

1. A 75-ohm system is generally a round cable with F-type
connector that can easily be attached to a terminal without
tools (not supplied).
2. A 300-ohm system is a flat “twin-lead” cable that can be
attached to a 75-ohm terminal through a 300-75-ohm
adapter (not supplied).

OUTDOOR ANTENNA CONNECTION

Use one of the following two diagrams if you connect an
outdoor antenna.
A: Using a VHF/UHF combination outdoor antenna.
B: Using separate VHF and/or UHF outdoor antennas.
Connect the outdoor antenna cable lead-in to the ANT.
terminal on the rear of the TV set.

F-type connector

75-ohm coaxial cable (round)

300-ohm twin-lead cable (flat)

A. Combination

VHF/UHF Antenna

B. Separ

ate VHF

and/or

UHF Antennas

Antenna cable

75-ohm

coaxial cable

300-ohm
twin-lead

VHF/UHF

antenna

VHF/UHF

antenna

300/75-ohm

adapter

(not supplied)

300-ohm
twin-lead

300-ohm
twin-lead

75-ohm
coaxial cable

OUT IN

VHF

antenna

UHF

antenna

Combiner

(not supplied)

or

or

6

Cable TV converter/

descrambler

(not supplied)

Two-set
signal
splitter
(not
supplied)

Cable TV Line

RF switch (not supplied)

OUT

IN

Advertising