Lokar Emergency Brake Warning Switch Kit - Manual (Page 2)

INS0114 Rev. 10/10/12 RPD 09/16/13 Page 2 © 2012 Lokar, Inc.
Wiring:
Power Switch type:
Ground Switch type:
Fused,
Switched
12V Power
Source
Fused,
Switched
12V Power
Source
Note: Some indicator lights/buzzers are non-directional, and will not have the (+) Input/Power or (-) Ground
sides marked and both wires will be the same color. This type can usually be connected with power flowing in
either direction. Some warning indicator lights/buzzers have extra connections or may require a relay. Consult
the instructions that came with the indicator light/buzzer to determine what type of connections it requires.
COM
Terminal
COM
Terminal
Input/
Power
Micro
Switch
Micro
Switch
NC
Terminal
NC
Terminal
Indicator
Light/
Buzzer
Indicator
Light/
Buzzer
Vehicle
Ground
Vehicle
Ground
Input/
Power
Ground
Ground
+
+
–
–
Fig. 6 Fig. 7
Fig. 3 Fig. 4 Fig. 5
Warning
Indicator
Trigger
Micro Switch
#4-40 x 3/4" Socket
Head Cap Screws
with Nylock Nuts
Normally Closed
Terminal (NC)
Common Terminal (COM)
Female Spade Connectors
Warning
Indicator
Trigger
Warning
Indicator
Pin
Emergency Brake Warning Switch Kit Installation Instructions