Manley MicMAID 4x4 Matrix-Switcher 10/2010 - present User Manual
Page 6
THE BACK PANEL
A. Power Switch: Where the IEC power cable is inserted, the fuse is placed, and the power is switched off and
on. Most users should be familiar with this feature set.
B. Inputs from Microphones A, B, C, & D: These are the inputs from each of your 4 microphones.
C. Outputs to Microphone Preamplifiers 1, 2, 3 & 4: These are the “sends” to each of your four micpreamps.
D. Inputs from Microphone Preamplifiers 1, 2, 3 & 4: These are the “returns” from each of your four micpreamps.
E. Direct Outputs: These outputs simply mirror the signals from the neighboring micpreamp returns. Think of
each of these as direct outputs from each of your 4 micpreamps. Use them to go to your console, your mixer,
your A/D converters, etc.
F. MON/REC Output: This is the output you hear when you are comparing mics to micpreamps through the Moni-
tor Section. The GAIN TRIM knob and the VARIABLE PHASE section of the front panel are only useable via
this output. All other outputs are passive. For more on the Monitor section, continue on to the next page.
6
A
B
B
B
B
C
C
C
C
D
D
D
D
E
E
E
E
F