Manley SHRIMP - Manual (Page 16)

SPECIFICATIONS
Vacuum Tubes: input tubes: 2 x 12AT7WA , output tubes 2 x 7044
Lamp type 1/4" X 1 1/4", 12 volt, 0.15 amp "fuse-lamp" (no, it is not a fuse)
Fuse type 120VAC operation: MDL 1/2 AMP / 250 Volt SLO-BLO
240VAC operation: MDL 1/4 AMP/ 250 Volt SLO-BLO
Gain 11.8 dB max
Noise Floor Typically -95 dB A WGT 20-20K with volume control fully open
(shorted input) Typically -106 dB A WGT 20-20K with volume control fully closed
Frequency Response 10 Hz - 80 KHz (-0.5dB at 20KHz)
Volume control "Left / right tracking" within 0.25 dB
Input Impedance: 250 Kohm
Output impedance: 50 ohms
Maximum Output: +26dBu @ 1.5% THD into 100K load
Maximum Output: +21dBm @ 1.5% THD into 600 ohm load
Power Consumption: 33 Watts (275mA @ 120VAC)
Dimensions: W=19", L=11", H=3 1/2"
Shipping weight: 15 lbs.
Five line level inputs unbalanced RCA
MUTE switch and Warm-Up muting delay
Accurately tracking NOBLE volume control
Center detented NOBLE balance control
Record Output
Two paralleled sets of unbalanced RCA main outs
All-Tube Single-Ended signal path
Built-in fun and happy tunes :>)
16
FEATURES