Alto-Shaam 1000-SK/II User Manual

Page 15

Advertising
background image

simple

control

smokers

installation

/

operation

/

service

manual

-

pg

. 13

O P E r A T I N g I N S T r U c T I O N S

I

o

I

o

Up/Down

Arrow Keys

Temperature

Display Button

Time Key

Holding

Indicator Light

Cooking

Indicator Light

On/Off

Power Switch

Hold Knob

Cook Knob

Digital

Display

Heat

Indicator Light

Smoke Timer

Smoke

Indicator Light

1.

Pus

h power switch to ON (I) position.

Control will display 0°F or 0°C.

2. Set the holding temperature.

Rotate the hold knob to the desired holding

temperature.

The set temperature will appear in

the Digital Display

140

.

F

and the temperature

display button will illuminate.

The holding indicator light will illuminate while

in hold mode.

Holding temperature range:

60° to 205°F (16 to 96°C)

3. Set the cooking temperature.

Rotate the cook knob to the desired temperature.

The set temperature will appear in the Digital

Display

250

.

F

and the temperature display

button will illuminate.

The cooking indicator light will illuminate while

in cook mode.

Cooking temperature range:

200° to 325°F (94 to 160°C)

Note: Cooking mode not active unless timer

is running.

4. Set timer.

Press Up or Down arrows when cook knob is set

to begin cooking.

Press Up or Down arrows to adjust the

time while cooking.

Note: Hold timer button for 3 seconds

when in cook mode to cancel timer (display

shows

----

) .

5. PREHEAT oven for 30 minutes before

loading food.

The heat indicator light will illuminate

and will remain lit as long as the oven

is calling for heat.

6. Load the oven with food and adjust cooking timer

as needed.

5. Load wood chip container.

Take one container load of dry wood chips and soak the

chips in water for 15 to 20 minutes. Shake excess water off

wood chips. Remove wood chip container from the interior

back panel of the smoker. Place the moistened chips in the

wood chip container and replace the container in the oven.

6. Set the Smoke Timer.

The Smoke Timer activates the heating element located

within the wood chip container. When the wood chip

container is full and the smoking timer is turned clockwise

as far as it will turn, the wood chips will smoke for

approximately forty-five minutes to

one hour.

To set the Smoke Timer, turn the smoking timer knob

past the required length of time, then immediately

bring it back to the correct setting.

Smoke Indicator Light will illuminate.
Keep the oven door completely closed during the

smoking cycle.

Notes:

• When the oven temperature reaches the set

temperature, the heat indicator light will turn off.

• Press and hold the Temperature Display Button

for 3 seconds at any time to display the Actual oven

temperature

190

.

F

.

To toggle between fahrenheit (°F) and celsius (°C):

Press the Temperature Display Button at any time to display the

alternate temperature.

The factory default is Fahrenheit. To change to Celsius:
1.

Press and hold the Temperature Display Button and the

Down Arrow Key for 5 seconds.

2.

The control will show

.

C

for 3 seconds to verify

selection and then show the temperature in ºC.

3.

Repeat to toggle to Fahrenheit.

Note: With a power failure, factory test, etc., the control will retain

the ºC or ºF setting selected by the user when power is restored.

Advertising
This manual is related to the following products: