MBRP S5042 - Manual (Page 2)

2007 Chev Avalanche & GMC Yukon XL 5.3L
Removal of stock system:
Figure 1
Figure 2
Figure 3
1. Apply a penetrating lubricant liberally to all exhaust
fasteners, hangers and rubber insulators.
2. Remove the hangers from the rubber insulators and
remove the exhaust from the vehicle. The tail pipe will
need to be cut to clear the rear axle.
Refer to Figures 1 & 2.
3. Remove the hardware holding the front flange together
and disconnect exhaust system.
Refer to Figure 3.
4. Remove the exhaust.
Refer to Figure 4.
S5042
©
12/07
Page 2 of 3
PAGE 2 of 3
Figure 4