Aluratek AEBK02FB - Manual (Page 9)

9
Chapter 3 - Getting Started
3.4 Before Using the Device
You should charge your Libre Air before using it. Please make sure the
Libre Air is powered off, connect the power adapter and charge its inter-
nal batteries for 4-5 hours continuously. The red LED will be on during
charging, The Red LED will turn off when charging is complete.
3.5 Basic Operation
A. Power On
When the Libre Air is off, press power button for 3 seconds to power on.
B. Power Off
When the Libre Air is on, press power button for 3 seconds to power off.
C. Standby
When the Libre Air is on, press power button shortly to enter Standby
mode. At this time, the LCD screen will be switched off. While in Standby
mode, press power button shortly to resume to reading mode.
Note: The whole “Power On” process takes about 40 seconds. To resume from
Standby mode to Reading mode, it takes only about 3 seconds. If you plan to take
a break from reading, it is suggested that you enter Standby mode instead of pow-
ering off the Libre Air to minimize the time it takes to get back to Reading mode.
D. Reset
While using your Libre Air, if any abnormal situation happens, such as
a system freeze, please use a paper clip to press the Reset key at the
back of the Libre Air. Then, the Libre Air will restart.
E. Icons
file is stored in SD card page is bookmarked
search mode
folder icon
picture file MP3 file
text file PDF file
EPUB file FB2 file
HTML file PRC file
RTF file MOBI file