Penske Racing Shocks 7300 Series - Manual (Page 10)

Part #
VS-AA AA .004 .004 .004 .004 Constant
VS-AAP AA+ .004 .004 .006 .006 Constant
VS-AM A- .006 .006 .004 .004 Constant
VS-A A .006 .006 .006 .006 Constant
VS-AP A+ .006 .006 .008 .008 Constant
VS-BM B- .008 .008 .006 .006 Constant
VS-B B .008 .008 .008 .008 Constant
VS-BP B+ .008 .008 .010 .010 Constant
VS-CM C- .010 .010 .008 .008 Constant
VS-C C .010 .010 .010 .010 Constant
VS-CP C+ .010 .010 .012 .012 Constant
VS-DM D- .012 .012 .010 .010 Constant
VS-D D .012 .012 .012 .012 Constant
VS-DP D+ .012 .012 .015 .015 Constant
VS-EM E- .015 .015 .012 .012 Constant
VS-E E .015 .015 .015 .015 Constant
VS-EP E+ .015 .015 .020 .020 Constant
VS-FM F- .020 .020 .015 .015 Constant
VS-F F .020 .020 .020 .020 Constant
1.350 O.D. 1.200 O.D. 1.050 O.D. .900 O.D. .750 X .020
Valving
Valve Stacks
Standard
Digressive
Valve
Stack
1.350 O.D. and 1.200 O.D. primarily affects Low Speed
.900 O.D. and 1.050 O.D. primarily affects High Speed
1.475 Shim is used on specific pistons and is generally the same thickness as the 1.350 shim
Constants Compression Valve Stack Rebound Valve Stack Constant
When refering to shock valving, (example: A/B), (A) refers to the compression valve stack and (B)
refers to the rebound valve stack.