Poolmaster 72774 Above-Ground Poolside BBall Game - Manual (Page 2)

A
ssembly I
nstr
uc
tions
2
Step 1
Thread Net on PVC Hoop.
This is the net right out of the package.
You will be working with the longer looped end.
This is a close-up of the circled portion on diagram 1.
This is one loop.
Fold the loop toward you, creating two loops.
Insert your finger through the two loops.
Release the thumb holding the loop in place and pull
on the two middle strings. The loop should slide up
and catch your fingers.
Take the loop from your finger and slide onto the
basketball hoop. Continue this process with each
loop until all loops are on the hoop.
1
1
2
3
4
5
6
2 3
5 6 4
poolmaster.com
Step 4
• Insert the (2) Rail Connectors to the (2)
Uprights and secure with (2) ¼ x 1 ¾
Bolts and Nuts (2). (Diagram B)
Step 3
• Situate the game on the pool rail at your desired location.
Using the holes in the Rail Connectors as guides, drill
(8) 3⁄16" holes in Top Rail - (4) holes per connector.
• Attach the Connectors to the pool rail and secure with
(8) 10-24 Stainless Bolts and Nuts. (Diagram A)
• Attach the (2) PVC Upright Supports to the Backboard
using (4) 2'' Bolts inserted through the front of the
Backboard through the matching holes on the PVC
Uprights. Secure with Hex Nuts.
Step 2
Note: Caution should be taken in the following steps to avoid
drilling holes in liner and/or having drilling debris fall in pool.
This debris may harm the liner if it falls into the pool.
Diagram A Diagram B