Assembly instructions: pro-view, Adjustable height poolside basketball game – Poolmaster 72850 Pro-View Adjustable Height Poolside Basketball Game User Manual
Page 3
Page 3
P.O. Box 340308
Sacramento, CA 95834-0308
ASSEMBLY INSTRUCTIONS:
PRO-VIEW
™
ADJUSTABLE HEIGHT
POOLSIDE BASKETBALL GAME
ITEM NO. 72850
3. Final Assembly
• Lift the backboard assembly and lower
mounting bracket onto the top of the
upright pole (FIGURE 5). At the desired
height, thread (2) large thumbscrews
through the mounting bracket and the
upright pole and then secure by tightening
the (2) large thumbscrews. Please note:
the backboard can be adjusted in the
future by loosening and repositioning the
thumbscrews.
• Insert cap into top of upright pole. A
rubber mallet may be needed to properly
seat the cap. CAUTION: DO NOT HIT THE
CAP WITH A METAL OBJECT.
• Use ball needle and hand pump (not
included) to inflate ball.
FIGURE 5
© 2008 Poolmaster, Inc., Sacramento, CA 95834, U.S.A. Poolmaster is a registered trademark of Poolmaster, Inc. Need Assistance? Call our Toll Free Consumer Service Number:
1-800-854-1492. Visit us at our Website: http://www.poolmaster.com
Made in Malaysia