ALESIS BassFX - Manual (Page 22)

8 Storing & Copying Programs
22
To Store a Program
1. In PLAY or EDIT mode, press
the VALUE knob. The display
will flash the current program
number.
2. Use the VALUE knob or the
foot pedals to select the
program number where the
current program will be stored.
If you want to save it in the
same program number, you can
skip this step.
3. Press the VALUE knob again
to store the program in the
selected place. The BassFX
then returns to the mode it was
in before you began the store
operation, and the destination
program becomes the current program.
To Copy a Program
A copy is just a store of a program that hasn’t been modified,
so just follow the same steps as you would to store a program.
The store operation
times out if you do
nothing for more than
five seconds. You also
can abort the operation
by turning the EFFECT
knob to a different
position.
1
2
3