Ping test – APC ADSL 4-Port User Manual
Page 19
ADSL 4-Port Ethernet USB Wireless-G Router User Guide
ADSL 4-Port Ethernet USB Wireless-G Router User Guide
Page 19 of 52
After running the Diagnostic Test, the screen will indicate the portion which pass or fail the test.
Please click on the
Help links, which will provide remedy to the problem as shown in Fig 1-10.
The purpose of the “Fix It “ button is to restore the router’s VPI and VCI to its originated setting.
Figure 1-10: Diagnostic Test Result screen
5.4.1
Ping Test
Once you have your ADSL Router configured, ensure you can ping the network. You can access
the Ping Test page by clicking on the “
here” hyperlink in Diagnostic Page. Type the target
address that you want to ping. If your PC is connected to the ADSL Router via the default
DHCP configuration, you should be able to Ping the network address 192.168.1.1. See
Fig 1-11.
If your ISP has provided their server address, try to ping the address. If the pings for both the
WAN and the LAN sides are complete and you have the proper protocols configured, you should
be able to surf the Internet. By default when you select ping test, the ADSL Router will ping
itself 3 times. The ADSL Router passed the Ping test; this basically means that the TCP/IP
protocol is up and running. If this first Ping test does not pass, the TCP/IP protocol is not loaded
for some reason; you should restart the ADSL Router.
Figure 1-11 : Ping Test Screen