PowerTap Joule 2.0 - Manual (Page 58)

Joule 2.0 User Guide page 58
Chapter 7: Setting Up CycleOps Joule 2.0
Setting Up Display
Joule 2.0 display can be customized for viewing preferences. PowerAgent software may also be
used to change settings.
1. Press and release the [MODE] button until Main mode is displayed.
2. Press [JOYSTICK] up/down to highlight Setup Joule. Press [JOYSTICK] in and
release to select Setup Joule.
3. Press [JOYSTICK] up/down to highlight Display. Press [JOYSTICK] in and release
to select Display.
4. Press [JOYSTICK] up/down to highlight Backlight Level. Press [JOYSTICK] in and
release to select Backlight Level.
5. Press [JOYSTICK] up/down to change Backlight Level from 1-10. Press [JOY-
STICK] in and release to save settings. Note: Backlight Level10 is the brightest level,
1 is the dimmest. Press [JOYSTICK] in and release to save changes.
6. Press [JOYSTICK] up/down to highlight Backlight Timeout. Press [JOYSTICK] in
and release to select Backlight Timeout.
7. Press [JOYSTICK] up/down to change Backlight Timeout from Off, 2 seconds, 5
seconds, 30 seconds, 1 minute or On. Note: the backlight will turn on after any but-
ton is pressed and remain on for the duration of the Backlight Timeout setting.
Press [JOYSTICK] in and release to save changes.
8. Press [JOYSTICK] up/down to highlight Contrast. Press [JOYSTICK] in and re-
lease to select Contrast.
9.Press [JOYSTICK] up/down to change Contrast from 1-10. Press [JOYSTICK] in
and release to save settings. Note: Contrast setting 1 offers little distinction be-
tween black and white shades while setting 10 offers greater distinction between black and white shades. Press
[JOYSTICK] in and release to save changes.
10. Press [JOYSTICK] up/down to highlight Sleep Time. Press [JOYSTICK] in and release to select Sleep Time.
Press [JOYSTICK] up/down to change Sleep Time from 1-5. Press [JOYSTICK] in and release to save changes.
11. Press [JOYSTICK] up/down to highlight Dashboard. Press [JOYSTICK] in and release to select Dashboard.
Press [JOYSTICK] up/down to change Dashboard from 3-6. Press [JOYSTICK] in and release to save changes.
Backlight Level: >
2
Backlight Timeout:
Contrast:
5
>
Sleep Time: >
4 >
Dashboard: >
6 >
Power Smoothing:
1
Power with Zeros:
Yes
Cadence Smoothing:
Yes
Speed Smoothing:
>
1 >
Back <
Report
Main
Display
10
Speed with Zeros: >
No >
Language: >
English >
Units: >
English >