American DJ Super Jewel - Manual (Page 2)

©
American DJ
®
- www
.americandj.com - Super Jewel™ Instruction Manual Page 3
Please carefully read and understand the instructions in this manual thoroughly before attempting to operate this unit.
These instructions
contain important safety information regarding the proper use and maintenance of this unit. Please keep this manual with the unit, for future reference. Super Jewel™
General Instructions
• Easy Lamp Replacement • Bright ZB-64514, 120v/300w or ZB-64516 220v/300w Lamp • Focusing
Adjustment
• Built-In Hanging
Y
oke
• Internal Microphone • Fan Cooled • Multi-Colored Beams • 3-W
ay Ef
fects Switch - 3 Operating Modes
• Sound
Active
Super Jewel™
Featur
es
Super Jewel™
W
a
rranty Registration
The
Super
Jewel™
carries
a
one
year
(365
days)
limited
warranty.
Please fill out the enclosed warranty card to validate your purchase. All
returned
service
items
whether
under
warranty
or
not,
must
be
freight pre-paid and accompany a return authorization (R.A.) number. If the unit is under warranty you must
provide a copy of your proof
of purchase invoice. Please contact American DJ
® customer support
for a R.A. number.
Halogen Lamp W
arning!
This fixture is fitted with
halogen
lamps
which
are
highly
susceptible
to
damage
if
improperly
handled.
Never
touch
the
lamps
with
your
bare
fingers
as
the
oil
from
your
hands will shorten lamp life.
Also, never move the
fixture until the lamps have had ample time to cool. Remember
, lamps are not covered under warranty
conditions.
Super Jewel™
Halogen Lamp W
a
r
ning
©
American DJ
®
- www
.americandj.com - Super Jewel™ Instruction Manual Page 4
Super
Jewel™
Pr
ecautions
Safety Issues:
This unit may blow a fuse if the maximum allotted
load of 5 amps is reached. If the fuse needs replacement, always replace the fuse with same exact type that was remove, unless other- wise instructed by an authorized
American DJ
® service technician. Use
of a dif
ferent type fuse from that which is recommended may cause fire
or electric shock and will void the manufactures warranty. •
To
reduce the risk of electrical shock or fi
re, do not expose this unit
rain or moisture
•
Do not spill water or other liquids into or on to your unit
•
Do not attempt to operate this unit if the power cord has been frayed or broken
•
Do not attempt to remove or break of
f the ground prong from
the electrical cord.
This prong is used to reduce the risk of electrical
shock and fi
re in case of an internal short
•
Disconnect
from main power before making any type of connection
•
Do not remove the cover under any conditions.
There are no user
serviceable parts inside
•
Never plug this unit in to a dimmer pack
•
Always be sure to mount this unit in an area that will allow proper ventilation.
Allow about 6” (15cm) between this device and a wall
•
Do not attempt to operate this
unit,
if
it
becomes damaged
•
This unit is intended for indoor use only
, use of this product outdoors
voids all warranties
•
During long periods of non-use, disconnect the unit’
s main power
•
Always mount this unit in safe and stable matter
•
Power cords should be routed so they are not likely to be walked on, pinched by items placed upon or against them.
• Cleaning -The fixture should be cleaned only as recommended by
the manufacturer
. See page 7 for cleaning details
•
Heat
-The
appliance
should
be
situated
away
from
heat
sources
such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.
•
The fixture should be serviced by qualified service personnel when:
A.
The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the unit.
C.
The unit has been exposed to rain or water
.
D.
The unit does not appear to operate normally or exhibits a
marked change in performance.