SIGMA BC 2209 TARGA - Manual (Page 33)

33
GB/USA
BC 2209 MHR
2 INStALLAtIoN oN tHE BIkE
INStALLING tHE tRANSMIttERS –
SPEED AND CADENCE
k Both transmitters can either be installed with cable ties
(permanent attachment) or optionally using the O-rings.
k
In order to achieve the necessary 12mm or less install
the transmittter and the magnet closer to the wheel hub.
INStALLING tHE MAGNEtS –
SPEED AND CADENCE/
PUttING oN tHE CHESt BELt
k Rub water or cardio-gel on the electrodes.
Switching between BIKE 1 and BIKE 2 is automatic.
A second speed transmitter must be used
(Accessory set “BIKE 2” Ref.-No. 00417,
“BIKE 2 incl. cadence” Ref.-No. 00415)
2.1 INStALLAtIoN oF tHE 2 nd BIkE
2209
open-c
lo
se
For reasons of energy consumption, the BC 2209 MHR is supplied
without a battery.
Please insert the battery by opening the battery compartment
cover with the tool provided. Once you have inserted the battery,
close the battery compartment with the aid of the tool.
The display automatically jumps to setting mode.
3 StARt-UP
8
24
19
11
7
23
5 9
21
15 16
18
10
6
22
14 13 12
17