SIGMA PC 10.11 - Manual (Page 20)

48 www.sigmasport.com
5 SETTING MODE
5.5.11 SETTING ThE TOTAL RUNNING TIME
Example: You have bought a heart rate monitor and want to take the
total running time of 5 hours and 36 minutes from your training diary.
Prerequisite: Your heart rate monitor must be in setting mode.
Press the TOGGLE (+) button repeatedly to scroll
until “Total time” appears on the display.
Press the START/STOP button. You will see zeros
below the total time. The first three digits for the
hours flash.
Press the TOGGLE (+) button five times until 5 is
displayed.
Press the START/STOP button. The last two digits
for the minutes flash.
Press the TOGGLE (+) button repeatedly until the
value is set to 36.
Tip: Hold down the TOGGLE (+) button to increase
the value quickly.