Speedtech ATS Spindle - Manual (Page 2)

2 | P a g e
The following instructions are intended for professional installers
and are guidelines only.
Speedtech Performance assumes NO
responsibility for the installation of any of its products. All products are
intended for off road use only and must be installed by qualified
professionals only.
Thank you for purchasing your new ATS AFX spindle Kit. Installing this product will require the
removal of some front suspension parts. Take all necessary precautions whenever jacking up
your vehicle and use safe and sturdy jack stands to support the vehicle whenever it is off the
ground. Be sure to take all other safety precautions required to do the job correctly.
Spindle Hardware Kit Checklist
AFX Spindle Instructions -1
AFX Spindles, One right hand, One Left hand
Bolts
½ x 2 1/2 NF Steering Arm Mount Bolt (2)
½ x 2 3/4 NF Steering Arm Mount Bolt (2)
Nylock Nuts
1/2 NF Nylock Jam Nut (4)
Washers
1/2 Plate Steering Arm Mount (4)