Aiwa AM-NX1 - Manual (Page 15)

15
z
You can also charge the rechargeable battery by
connecting the AC power adaptor directly to the
recorder.
Connect the headphones/earphones with the
remote control to i.
Connect the AC power adaptor to DC IN 3V on
the recorder, and then press x on the remote
control while the recorder is stopped.
“Charging” and e appear in the display and
charging starts. Full charging takes about 3.5
hours. Charging is complete when
e
disappears. Charging time may vary depending
on the battery condition.
Notes
• If you start playback or do another operation
during charging, the charging will stop.
• “Charging” and e may not appear in the
display immediately after you place the
recorder on the battery charging stand. The
indication will, however, begin flashing after a
few minutes and charging will begin.
• Charge the battery at a temperature of +5°C
(+41°F) to +40°C (+104
°
F).
Battery life
See page 30.