Remote transmitter functions – Ultra Start 1271M User Manual

Page 8

Advertising
background image

Arm/ Lock

(optional)

1. Press and release the button.
2. The park lights will flash and the siren* or horn (optional) will chirp one time.
3. The system will arm and doors will lock (optional).

NOTE: The LEDs on the antenna will start flashing within five seconds.
If installed, the starter disable will activate.

Disarm/ Lock

(optional)

1.Press and release the button on the remote transmitter.
2.The park lights will flash and the siren* or horn (optional) will chirp two times.
3.The system will disarm and doors will unlock (optional).

NOTE: The LEDs on the antenna will stop flashing. If installed, the starter
disable will deactivate.

Silent Arm/Disarm

1. Press and release the and buttons

simultaneously.

a) If the doors are in the locked position: The park lights will flash two times
to confirm the doors have unlocked, without siren* chirps or horn honks.
b) If the doors are in the unlocked position: The park lights will flash one
time to confirm the doors have locked, without siren* chirps or horn honks.

Constant Lock

(optional)

1. Press and release, then press and hold the button.
2. The doors will lock. The park lights will flash and the siren* or horn (optional)
will chirp one time.
3. The lock output from the system will stay active until the button is released.

NOTE: This feature can be used on select vehicles to roll up the power
windows or to close a power sunroof.

*Alarm series ONLY!

Remote Transmitter Functions

OWNER’S GUIDE

PAGE 8

Advertising
This manual is related to the following products: