Telenav for Nextel Supported Devices: v4.0 for BlackBerry 7520 - Manual (Page 16)

© TELEVIGATION 2003-5 PAGE 16 OF 32
save the address, or use it in the current application context. For example, if you are trying to get a Map, you can
use Finder to get a business address, and then get a Map around that address.
Using a Waypoint as an address
The Waypoints list appears to be similar to the Recent Stops list when it is
displayed. Waypoints are entered using the mark feature in TeleNav
Tools, and from Maps. When the capacity of the push down list is
exceeded, the eldest element on the list is removed when the new
element is added. When Waypoints are deleted from the list, the list is
compressed. Waypoints are not derived from knowledge of a street
address, but Recent Stops and Favorites are.
If you choose to use a Waypoint as an address, you will be presented
with a list of waypoints you have previously marked and labeled as shown
to the right. Highlight the one you want, and press OK. At this point, your
handheld will contact the TeleNav servers to convert the latitude and
longitude of the waypoint to an approximate street address.
Address Book
When you select Address Book, TeleNav examines the Address Book for
contacts that have addresses. TeleNav then presents a list of names that
do have addresses. On the left side of the name is a “+” symbol that you
can click with the trackwheel to expose either the home or work address,
or both.
Select the specific address you want, and press the trackwheel
The address content is passed to the Address Input Form so that you can
edit it when TeleNav cannot validate it as it was found in the Address
Book. Edits are not passed back to the Address Book.