Agilent Technologies 8510C - Manual (Page 13)

13
Upgrades for 85106C-001 and 85106C-002 (added 8517B,
replaced 83621A/B with 83651A/B, and replaced
8350B/83540A with 83621A/B)
• 85106D-001 (added 8517B and replaced 83621B
with 83651B)
• 85109C-002 (replaced 8350B/83540A with 83621A/B
Upgrade consists of two test heads and a millime-
ter test set. It does not include calibration kits, test
port cables or rack.
• E7347A upgrade to an 8510XF 85 GHz system
• E7357A upgrade to an 8510XF 110 GHz system
The following options are available for both
upgrades:
• E73x7A-STD Standard configuration
• E73x7A-005 Add 45 MHz to 2 GHz low frequency
extension
• E73x7A-006 Add RF pass thru (provides coupled
output of 50 GHz source for additional test sets.
Additional test set(s) must have option 001
installed.)
• E73x7A-056 Add both low frequency extension
and RF pass thru
Instrument and firmware upgrades
Upgrades for 8510A
8510C Upgrade (includes on-site installation by
Agilent Customer Engineer)
• 85103E 8510A to 8510C upgrade (replaces the
top unit on the 8510A)
• 85103E-001 adds rack modification kit (for sys-
tems mounted in an 85043A system rack)
• 85103E-002 adds 8360 series source compatibility
kit for 8517A/B test sets
• 85103E-003 adds 8360 series source compatibility
kit for the 8514/15 and 85110A test sets
• 85103E-004 adds 8360 source compatibility kit for
the 85110L test set
Time domain upgrade
• 85012A time domain (Option 010) upgrade for
8510A (customer installed)
Upgrades for 8510B
8510C Upgrade (includes on-site installation by
Agilent Customer Engineer)
• 85103F 8510B to 8510C upgrade (replaces the
top unit on the 8510B)
• 85103F-001 adds rack modification kit (for sys-
tems mounted in a 85043A system rack)
• 85103F-002 adds 8360 series source compatibility
kit for 8517A/B test sets
• 85103F-003 adds 8360 series source compatibility
kit for the 8514/15 and 85110A test sets
• 85103F-004 adds 8360 source compatibility kit for
the 85110L test set
Upgrades for 8510C
Wideband IF detector upgrade (reference to 85108A
for additional hardware requirements)
• 85111B pulsed-RF measurement capability
upgrade for the 8510C (upgrade adds circuitry
to the 8510C and includes on-site installation by
Agilent Customer Engineer)
Time domain upgrade
• 85012C time domain (Option 010) upgrade for
8510C (customer installed)
Firmware upgrades for 8510C
• 11575J revision 7.xx upgrade (customer
installed)
For any revision of 8510C firmware currently
installed.
• 11575J-002 adds 8360 series source
compatibility kit for 8517A/B test sets
• 11575J-003 adds 8360 series source compatibility
kit for the 8514/15 and 85110A test sets
• 11575J-004 adds 8360 source compatibility kit for
the 85110L test set