Tuff Country 20744 - Ford 73-79 F150 raduis arm brackets - Manual

PART NUMBER : 20744 (supersedes FX4RAD)
1973 — 1979 Ford F150
1978 — 1979 Ford Bronco (full size)
4” Radius arm relocation bracket
PARTS LIST:
Part
# Description Qty.
FX4RD1 DS radius arm relocation bracket 1
FX4RD2 PS radius arm relocation bracket 1
12112B 1/2” x 1 1/2” bolts 12
716WA 7/16” flat washers 24
12UN 1/2” unitorque nuts 12
20744INST Instruction sheet 2
MIRRORHANGER Rear view mirror warning hanger 1
WARNINGDECAL Warning decal 1
INSTALLATION MANUAL
4” RADIUS ARM
RELOCATION BRACKET
1973 — 1979 FORD F150
1978 — 1979 FORD BRONCO
PART # 20744
(supersedes FX4RAD)
sj071105rev.01
Congratulations on your selection to purchase a Tuff
Country EZ-Ride Suspension System. We at Tuff
Country EZ-Ride Suspension are proud to offer a
high quality product at the industries most
competitive pricing. Thank you for your confidence
in us and our product.
Make sure to use thread locker or locktite on all new
and stock hardware associated with the installation
of this suspension system.
It is the responsibility of the installers to make sure
that the rear view mirror hanger is hung from the
rear view mirror. The rear view mirror hanger has
instructions on proper post installation procedure.
The Tuff Country EZ-Ride Suspension product safety
label that is included in your kit box must be
installed inside the cab in plain view of all
occupants.
It is the responsibility of the customer or the
mechanic to wear safety glasses at all times when
performing this installation.
If a body lift is used in conjunction with any Tuff
Country EZ-Ride Suspension product, your Tuff
Country EZ-Ride Suspension WARRANTY WILL BE
VOID.
It is the customers/installers responsibility to read
and understand all steps before installation begins.
OEM manual should be used as a reference guide.
IMPORTANT CUSTOMER INFORMATION
Tuff Country EZ-Ride Suspension highly
recommends that a qualified or a certified mechanic
performs this installation.
If you desire to return your vehicle to stock, it is the
customers responsibility to save all stock hardware.
It is the responsibility of the customer or the
mechanic to wear safety glasses at all times when
performing this installation.
It is the customers/installers responsibility to read
and understand all steps before installation begins.
OEM manual should be used as a reference guide.
This vehicles reaction and handling characteristics
may differ from standard cars and/or trucks.
Modifications to improve and/or enhance off road
performance may raise the intended center of
gravity. Extreme caution must be utilized when
encountering driving conditions which may cause
vehicle imbalance or loss of control. DRIVE SAFELY!
Avoid abrupt maneuvers: such as sudden sharp
turns which could cause a roll over, resulting in
serious injury or death.
It is the customers responsibility to make sure that a
re-torque is performed on all hardware associated
with this suspension system after the first 100 miles
of installation. It is also the customers responsibility
to do a complete re-torque after every 3000 miles or
after every off road use.
After the original installation, Tuff Country EZ-Ride
Suspension also recommends having the alignment
checked every 6 months to ensure proper tracking,
proper wear on tires and front end components. Tuff
Country EZ-Ride Suspension takes no responsibility
for abuse, improper installation or improper
suspension maintenance.