AT&T 952 - Manual (Page 7)

T E L E P H O N E M E M O R Y
7
Directory Card
Remove the plastic
cover and the
directory card.
Write your
telephone
numbers in the
spaces provided,
and write the
telephone
numbers (or
names) that you
want to store in
each memory
location. Replace
the card and
plastic cover in
the space
provided.
Two-Touch
Dialing
The 16 gray spaces
on the directory
card are two-touch
memory locations.
To dial one of these
numbers you must
press l, then
the memory button
next to the number.
One-Touch Dialing
The 16 white spaces on
the directory card are
one-touch memory
locations. You can dial
one of these numbers by
pressing the memory
button next to the number.
Storing Memory Numbers
1 Lift the handset.
2 Press and release P.
3 Enter the telephone
number you want to store
(up to 24 digits) or press
a to store the last
number dialed.You will
hear a beep each time you
press a button. Press
P
to store a three-second
dialing delay.
4 Press and release a
one-touch location
— OR —
Press and release
l,
then a two-touch location.
You will hear a two-beep
confirmation tone.
5 Hang up.
Repeat Steps 1-5 to
store another number.
Erasing Numbers
To remove a number from memory, enter another number in the
same location. To clear a memory location and leave it empty,
1 Press L or l, then lift the handset.
2 Press P.
3 Press the button of the memory location you want to clear.
Dialing Memory Numbers
1 Press
L or l.
2 Lift the handset
— OR —
Press
K
— OR —
Press
h and listen
for dial tone.
3 Press and release a one-touch
memory location
— OR —
Press and release l
then a two-touch memory
location.